Why Dust Mopping The Floor Is So Important.
Dust mopping the floor is one of the most important steps in any floor care maintenance program. As with any type of cleaning, removing dry soils before adding liquid makes the entire process much easier. Because it is usually done dry, it also allows the floor to be cleaned while the area is being used. There is no chance of anyone slipping and falling and makes it possible to remove surface soils sooner to keep foot traffic from grinding dirt into the floor. While dust mopping the floor is a fairly common practice, there are several factors that can make it more productive and reduce the chances that it will result in damage to the floor or the floor finish. Knowing how to dust mop properly can reduce the amount of regular and restorative maintenance.
Tools For Dust Mopping The Floor
There are many different variations of dust mops, but I am going to focus on 3 common types. Cotton, Synthetic and Microfiber.
Cotton Dust Mops – These are the traditional and least expensive type of dust mop. They have been around for years. Cotton is a natural fiber that works well to “push” large soils and debris but is not very effective for fine dust particles. To make them more effective, it is common to use a dust mop treatment. This is a chemical that is sprayed directly onto the dust mop to aid in trapping dust. While there are many different formulas for dust mop treatment, the main compound is usually a natural oil, typically banana oil. This oil based treatment can cause many short and long-term problems for floors. If too much is used, the floors can become extremely slippery and difficult to clean. Because of the oil, cleaning with a water based solution is less effective. (Water and oil don’t mix) To remove the film, a de-greasing chemical is needed which can cause damage to floor finish.
The oil residue will also cause the floor to become sticky and attract dirt. If a high-speed burnisher is used over this oily, dirty film, the floor finish will begin to yellow in the traffic lanes. The oil can also be tracked on to adjoining carpet areas, making them more difficult to clean.
There are a couple of other factors to take note of with cotton dust mops. When using them for dust mopping a floor in high humidity conditions, they will catch and drag because of the moisture. This causes them to be very difficult to use. Also, because cotton is a natural fiber, they are difficult to launder and are usually considered to be disposable. Though cotton dust mops can be brushed free of most large debris, the fine dust that is trapped by the dust mop treatment is difficult to remove. Being a natural fiber, the cotton fibers will also begin to breakdown quickly, and give less than optimal results.
While the purchase price of cotton dust mops is often less than other types, the long-term cost is much higher because of the added cost of dust mop treatment, frequent replacement and the shortened maintenance cycle of the floor.
Cotton dust mops are by far the most expensive way of dust mopping the floor.
Synthetic Dust Mops – Unlike the natural fibers of a cotton dust mop, as the name suggests, synthetic fiber dust mops are made of man-made yarn or plastic. When this plastic yarn is pushed along the floor, dust is collected and held by static electricity rather than using a dust mop treatment. Synthetic dust mops are commonly stitched in a looped end pattern that prevents fraying and gives better pickup of soil. Because of the looped end construction and the lack of oily treatment, these dust mops can be laundered many times. It is also easy to shake them out or use a brush to clean them as well. Since there is no oily treatment, the static electricity that holds the fine dust is easily broken, leaving them clean and ready to use.
The synthetic fibers are also not effected by moisture, unlike cotton and are much lighter to push regardless of humidity or presence of liquid. The plastic fibers and their clean-ability cause synthetic fiber dust mops to last much longer than their cotton counterparts.
Although synthetic dust mops are usually 10-15% more to purchase, when you factor in their advantages, the overall cost of dust mopping the floor is decreased dramatically when they are used.
Microfiber Dust Mops – The evolution of microfiber for cleaning is one that is quickly changing many old traditions. Microfiber is more efficient, easier to use, and more importantly, much more effective.
Similar to synthetic dust mops, microfiber dust mops are made of plastic fibers. The difference is in the types of plastic that are used. In a past post, I created an info-graphic to show How Microfiber Works To Clean and how it is made. But when it comes to dust mopping, Microfiber is extremely effective. Because the yarn is constructed of a very fine plastic fiber, they can be used both dry and even damp. This allows floors to be cleaned while dust mopping, reducing an entire step in some cases. The channels in the individual fibers grab and hold the very fine dust particles, preventing any of the dust from going airborne. Microfiber dust mops can be rinsed clean or laundered and increasing their usable life.
All of these factors combined make microfiber the hands down, best option for dust mopping the floor.
Dust Mopping The Floor and Green.
With either synthetic or microfiber dust mops, there is a rather large green impact. Because there are no chemicals needed and they can be re-used over and over, their increased effectiveness and efficiency, and the ability to actually clean during peak traffic times, dust mopping becomes a very important part of a green cleaning program.
The bottom line is that the more soil and debris you can remove from a floor, the easier the floor is to maintain and keep the dirt from spreading throughout a building. Regardless of the type of dust mop you chose, the more you do it, the better your over all cleaning results will be.